Cart 0

LET'S TALK ABOUT GEARS - How To Efficiently Use Your Bicycle Gears

We have talked about gears before and we admit, some information might be too overwhelming especially for beginners! Now we have narrowed down the list of tips to get you up to speed in no time.


1. Practice Makes Perfect
You’ll be using your bike gears a lot, and chances are, you’ll get plenty of practice in as you ride anyway, but if you’re new to cycling, have just got a new bike or changed bike, then spend some time getting used to how the gears change.
Ride up a down a fairly quiet road or path and practice shifting up and down the gears, both front and back, until you can change gear almost instinctively. It will help you on those moments halfway up a climb when you realize you’re in too hard a gear and need to shift quickly!

2. Right = Rear, Left = Front
Most bikes will have two sets of gear cogs. The front set, known as the chainrings, will give you big changes in gear. The front derailleur that shifts the chain between these chainrings is controlled by the left gear lever (or shifter).
The rear cogs (or sprockets) together form the cassette, and the derailleur that shifts the chain up and down these is controlled by the right shifter.

3. Don’t cross the chain!
It’s really tempting to stay on one chainring, and just shift the gears at the back. That’s mostly fine, except for one thing. You really need to avoid using the opposite extreme ends of the gears. So, for example, don’t use the smallest cogs on the back and the front, or the largest cogs on the back and the front. This pulls the chain between them at an angle, which can cause it to stretch and deform.

4. Anticipate the hill
When you are approaching a hill, get ready to start shifting down the gears as soon as the hill starts. That way, you won’t be caught in too hard a gear halfway up, unable to pedal, which means you might have to get off and walk.
It’s much easier to get up hills, particularly long or steep ones, if you shift to the easiest gear and spin your legs. Shifting to the right gear at the right time for you will take a bit of practice, so it’s better to go to too easy a gear then shift up than the other way round.
If you do find yourself in too hard a gear on a climb, try and ride sideways across the slope and change gear. If the chain is under a lot of pressure, like when you are pedaling up a hill, it can’t shift properly. Riding something flatter even temporarily will hopefully relieve the pressure enough to allow you to get to an easier gear.

5. Left = big changes, Right = fine tuning
If you’ve got a hill coming up, it’s quicker to shift down using the left shifter, which will shift the front gears, rather than the right which controls the rear gears. This will take you to an easier gear, and then you can fine tune using the rear gears.

6. Don’t shift too quickly
If you are accelerating down a hill or on the flat, it’s tempting to shift up to a higher gear as quickly as possible. On some bikes, this can cause the chain to jump off the gears completely, which means you’ll have to stop and put it back on, which usually means greasy black fingers. Shift gradually, making sure the chain has engaged with each new gear before moving onto the next one. Different gear systems will respond differently to get to know how sensitive your bike is to this.


Easy, peasy, right? So go on, go out and get your gears going! :)

Older Post Newer Post

Leave a comment

Please note, comments must be approved before they are published