Cart 0

TOP Most important tool kits for cyclists

Purchasing an extensive toolbox is pleasant on the grounds that it accompanies all that you require, and most likely more, yet it's difficult to drop a few hundred dollars without a moment's delay.

In view of the cost, and on the grounds that you may pay for apparatuses that you will never utilize, now and then purchasing a couple of devices at once is the better choice. You just buy what you need, and it spreads the cost out finished a more extended timeframe.

#1 ALLEN KEYS

Allen Wrench Set 10 pc- Metric Metric allen wrench set with split ring keeper. Allen wrench sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 5.5mm, 6mm, 8mm, 10mm. Hardened and tempered industrial grade chrome vanadium steel, with black oxide finish for durability. Perfect addition to any shop, garage or household.

#2 BOTTOM BRACKET TOOL

The BBT-9 is used to remove and install external bearing crankset bottom brackets. One end of the BBT-9 securely engages the 16 notches of the bottom bracket cups. The other end of the tool engages the 8 internal splines of the crank arm adjustment cap. The BBT-9 fits cups and lockrings with 16 external notches and an outside diameter of approximately 44mm.

#3 CHAIN TOOL

A shop favorite updated to work on all chains including single-speed and all multi-speed, 5 to 12-speed derailleur chains. Because of the tremendous force needed to remove chain pins, our Chain Tool is made from investment cast steel

#4 CASSETTE / FREEWHEEL TYPE

The rear cogs are attached to the hub in one of two ways. Newer bikes tend to use type hub called a “cassette hub.” The cassette hub uses a “freehub” sytem, which is a type of clutch mounted to the body of the hub. This cylindrical mechanism ratchets counter-clockwise for coasting, and locks clockwise for driving the bike when pedaled. The freehub body has a series of splines on the outer shell. “Cassette” sprockets slide over these splines. A lockring threads into the freehub and holds the sprockets, or cogs, in place. When the cogs are removed, the ratcheting freehub remains on the hub body. Most modern bicycles use the freehub system. See a typical cassette hub below.

#5 CHAINRING BOLT TOOL

Now you can place your order without having to leave your house with bikeinn, your online store specialized in material. We want you to enjoy your leisure time in a unique way and so we offer the biggest selection in Road chainrings products of Campagnolo. Inquire the products that are listed like Campagnolo Super Record Screws designed to give you complete comfort while you are exercising your favourite sport or your daily activities.

#6 CABLE CUTTERS

  • Cuts inner and outer bike cables,spoke,brake cable
  • Compress the cable end
  • Penetrates the blocked inner cable with the special ferrule-hole design
  • Material:Stainless Steel

#7 PEDAL SPANNER

This is a standard 15mm pedal spanner which will fit the majority of bikes. 2mm plate steel chrome finish with a plastic dipped handle. We also sell a multi size pedal spanner, if you don't know the size you need please dont buy this one, have a look our multi purpose tool instead.

 #8 TYRE LEVERS

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration.

#9 SCREWDRIVERS

 

 For front and rear mech limit screws, plus a tiny screwdriver is always useful.

#10 TORX DRIVERS

For brake/rotor adjustment. Torx screwdrivers hardened and tempered steel blades with soft grip handles. Contents T4, T5, T6, T7,T8, T9, T10, T15 & T20.



Older Post Newer Post